Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
When performing the Cleaning and Maintenance
operations, follow these instructions:
•
wear protection accident-proof gloves;
•
do not use solvents or inflammable materials;
•
do not use abrasive and/or metal sponges to clean
the machine and it's components:
take care to avoid dispersing liquids in the
•
surrounding area;
•
do not wash machine components in a dishwasher;
do not dry parts of the machine in a conventional
•
and/or microwave oven;
do not immerse the machine in water;
•
•
do not expose the machine to direct sprays of water:
•
for cleaning use only lukewarm water and a suitable
sanitizing agent (conforming to current regulations
in the user's country) that will not risk damaging
machine components;
•
on completing work, make sure that all protective
covers and guards that have been removed or
opened are set back in place and properly secured.
Cleaning and sanitization are operations that must be
performed with utmost care and on a regular basis to
guarantee the quality of the beverages dispensed and
compliance with mandatory hygiene standards.
The bowl must be cleaned and sanitized at
least once a day and in any case, in
compliance
with
regulations in the country of use. These
operations need to be performed more frequently if
demanded by the characteristics of the product used;
for more details, contact the product supplier. lf the
machine is not used continuously throughout the day,
wipe the dispensing tap area and the product outlet
pipe with a clean cloth and sanitizing fluid, as illustrated
in the figure on the next page.
The stainless materials, plastic and rubber
used to manufacture said parts, as well as
their particular shape, make them easy to
clean but do not prevent the build-up of germs
and mold in the event of inadequate cleaning.
It is forbidden to clean or service the machine
when it is plugged in and the main switch is
positioned "ON".
the
currant
hygiene
www.combisteel.com
To carry out maintenance and cleaning of the machine, it
is possible to remove the upper parts of the side
protections, if necessary Lift the upper part with no
hesitation: to remove them, Once finished, fit the part in
the side protection again.
7.1 Emptying the bowls
Before a bowl may be cleaned, it must be emptied of the
previously prepared product.
If the bowl is to be cleaned prior to the first use of the
machine, it need not be emptied, In that case refer
directly to section 7.2.
For the sake of simplicity only the operation of the right
bowl will be illustrated to operate the other bowls simply
carry out the same sequence of steps on the switches of
the bowl in question,
Set the bowl to juice mode if it need to be cleaned, and
then release all the material inside the bowl, as the figure
below.
After that, press the
and unplug the machine.
button" "in position "OFF"
14
Advertenties
Inhoudsopgave
Probleemoplossen
