Download Inhoudsopgave Inhoud Print deze pagina

CONSTRUCTA CD30646 Gebruiksaanwijzing En Montagehandleiding pagina 27

Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

Adjust the wall closing strip to the clearance
3.
between the appliance and the wall.
Snap the wall closing strip into the holders.
4.
Fit the grease filters.
5.
Establish the pipe connection.
6.
All manuals and user guides at all-guides.com
7.
Note
You can conceal the housing of the extractor hood
within the upper cabinet. In doing so, observe the
following:
¡ The intermediate floor must not rest on the housing.
¡ The front panel must not be secured to the housing.
¡ Access to the housing must remain possible in or-
Changing the filter pull-out's limit stop
On some versions of the appliance, the limit stop for
the filter pull-out can be changed. Spacers are included
with these appliances in order to set the appliance's
handle strip so that it is flush with the fitted unit.
1.
2.
Establish the electrical connection.
der to change the filter and for after-sales service.
Pull the filter pull-out towards the front.
Shorten the spacers to the required dimension and
insert them into the slot specified.
Installation instructions en
27

Advertenties

Inhoudsopgave
loading

Deze handleiding is ook geschikt voor:

Cd30637Cd30677Cd30976

Inhoudsopgave