CONSTRUCTA CD30646 Gebruiksaanwijzing En Montagehandleiding pagina 26
Verberg thumbnails
Zie ook voor CD30646:
- Gebruikershandleiding en installatie-instructies (56 pagina's)
Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
en Installation instructions
Use the enclosed template to mark the fastening
7.
points on the inside of the cabinet and use a
bradawl to make indentations where the holes are
to be.
Screw in the four enclosed screws for the angle
8.
bracket up to 5 mm.
Preparing the appliance
Insert the holders for the wall edging strip on the
1.
outside rear of the appliance into the cut-outs and
fold them in to the centre of the unit.
Use the screws provided to secure the handle strip
2.
to the filter pull-out.
26
All manuals and user guides at all-guides.com
Connect the enclosed power cord to the appliance
3.
and secure the stain relief.
Screw the two angle brackets to the appliance. Note
4.
the position of the screws. Screw in the screws until
8 mm of the threaded section is still protruding.
Installing the appliance
Use the angle brackets to hang the appliance on
1.
the screws, align it and tighten it.
Appliance width 90 cm: Pull the filter pull-out out
2.
completely towards the front. Also use two screws
each on the left and right to screw the appliance to
the side upper cabinets from below.
Advertenties
Hoofdstukken
Inhoudsopgave
