en Installation instructions
WARNING ‒ Risk of fire!
¡ Grease deposits in the grease filter may
catch fire.
▶ The specified safety clearances must
be complied with in order to prevent a
build-up of heat.
▶ Observe the specifications for your
cooking appliance. If gas and electric
hobs are being operated together, the
largest specified clearance applies.
▶ The appliance must be installed with
no more than one side directly next to
a high-sided unit or a wall. The dis-
tance between the appliance and wall
or high-sided unit must be at least
50 mm.
¡ Grease deposits in the grease filter may
catch fire.
▶ Never work with naked flames close to
the appliance (e.g. flambéing).
▶ Do not install the appliance near a
heat-producing appliance for solid fuel
(e.g. wood or coal) unless a closed,
non-removable cover is available.
There must be no flying sparks.
WARNING ‒ Risk of injury!
¡ Components inside the appliance may
have sharp edges.
▶ Wear protective gloves.
¡ The appliance may fall down if it has not
been properly fastened in place.
▶ All fastening components must be fixed
firmly and securely in place.
¡ The appliance is heavy.
▶ To move the appliance, two people are
required.
▶ Use only suitable tools and equipment.
¡ Changes to the electrical or mechanical
assembly are dangerous and may lead to
malfunctions.
▶ Do not make any changes to the elec-
trical or mechanical assembly.
WARNING ‒ Risk of electric shock!
¡ Sharp-edged components inside the ap-
pliance may damage the connecting
cable.
▶ Do not kink or trap the connecting
cable.
¡ If the appliance or the power cord is dam-
aged, this is dangerous.
▶ Never operate a damaged appliance.
24
All manuals and user guides at all-guides.com
▶ Never pull on the power cord to unplug
the appliance. Always unplug the appli-
ance at the mains.
▶ If the appliance or the power cord is
damaged, immediately unplug the
power cord or switch off the fuse in the
fuse box.
▶ "Call Customer Service." → Seite 21
▶ Repairs to the appliance should only
be carried out by trained specialist
staff.
¡ Incorrect repairs are dangerous.
▶ Repairs to the appliance should only
be carried out by trained specialist
staff.
▶ Only use genuine spare parts when re-
pairing the appliance.
▶ If the power cord of this appliance is
damaged, it must be replaced by the
manufacturer, the manufacturer's Cus-
tomer Service or a similarly qualified
person in order to prevent any risk.
¡ Improper installation is dangerous.
▶ Connect and operate the appliance
only in accordance with the specifica-
tions on the rating plate.
▶ Connect the appliance to a power sup-
ply with alternating current only via a
properly installed socket with earthing.
▶ The protective conductor system of the
domestic electrical installation must be
properly installed.
▶ Never equip the appliance with an ex-
ternal switching device, e.g. a timer or
remote control.
▶ When the appliance is installed, the
mains plug of the power cord must be
freely accessible. If free access is not
possible, an all-pole isolating switch
must be installed in the permanent
electrical installation according to the
conditions of Overvoltage Category III
and according to the installation regula-
tions.
▶ When installing the appliance, check
that the power cable is not trapped or
damaged.
Information on the installation situation
¡ Install this appliance in a kitchen cupboard.