Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
A) Gas connection
NL
Cat: II 2EK3B/P
The gases used for the operation of cooking appliances may be grouped by
their characteristics into two types:
* G25.3 Aardgas
* G20 Aardgas
* G30 / G31 Butaan/Propaan
The fitting (fig. 8.2) is made up of:
A - Gas train terminal fitting (rh or lh)
B - Gasket
C - Conical connector
Use rigid or flexible connection pipes which comply with applicable regulations.
If compression fittings are used, tighten firmly using two spanners (fig. 8.4).
In particular, make sure that:
* the flexible hose does not come into contact with any parts of the cooker with
surface temperatures in excess of 70˚C;
* the flexible hose does not exceed 75 cm in length and does not come into
contact with sharp edges or corners;
A
B
C
1/2" gaz conique
* the hose is not under tension or
twisted and is not kinked or too
tightly bent;
* the connection with rigid metal pipes
should not cause stresses to the gas
ramp.
* we advise replacing the gasket on
the slightest sign of deformation or
mperfection.
* the hose can easily be inspected
along its entire length to check its
Fig. 8.2
condition; hoses should replaced
after maximum of three years.
240
Advertenties
Inhoudsopgave
