Disconnecting the battery
Turn off the system, apply the parking brake, do not have a person seated in the wheelchair and
position the Rollz Motion Electric on a flat surface before removing the battery.
Find the battery cable and disconnect the battery cable by turning the metal ring on the
connector anticlockwise. You can find the battery cable in the basket under the seat. After
disconnecting the cable you can unwrap the Velcro strips to take out the battery.
Figure 64:
Turn the system off before removing the battery.
Figure 65:
Locate and disconnect the battery.
50
1
Press power button on
Press power button on
joystick or push support to
front or rear controller to
turn system off
turn system off.
2
Find the battery cable on the left side in
Find the battery cable on the left side
the basket underneath the seat.
in the basket underneath the seat.
3
Disconnect the battery from the
Disconnect the the battery from
motor controller by turning the
the motor controller by turning
the metal ring counter-clockwise.
metal ring counter-clockwise.