Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
d. Check whether both handles are at the same height using the height indexation.
e. Make sure the handles are positioned in a straight line above the frame of
the Rollz Motion Electric, pointing forward.
f. Turn the adjustment handles clockwise to tighten them (Figure 22) and
(Figure 23)
.
g. Place the adjustment handles vertically so that they point straight down. You do this
by gently pulling the adjustment handle outwards and turning it to the correct position
(Figure 24)
.
CAUTION
Always set both handles at the same height to maintain stability. When height is incorrectly set,
this may cause imbalance that may increase the risk of injury. When the rollator is not adjusted
to the correct height, it can lead to neck or back pain.
Walking with the Rollz Motion Electric - as a rollator
Thanks to the ergonomic design, you can walk upright, stable and comfortable with the
Rollz Motion Electric.
a. First make sure the handles are adjusted to the correct height. See above
in Adjusting the height for correct posture.
b. Stand in between the handles while walking. This way you walk as close
as possible to the walker, which offers the most support (Figure 25).
You could lean on the Rollz Motion Electric if necessary.
c. Try to keep your arms and hands as relaxed as possible, this prevents too
much tension on body parts.
d. Keep an eye on your surroundings. Do not focus your eyes downwards,
but forwards, which also improves the balance.
CAUTION
While you walk with the rollator, keep looking in front of you to determine a safe route.
WARNING
Prevent yourself from driving one or all the wheels into a hole or uneven terrain. The
rollator could tilt diagonally and you might fall. The rollator could get damaged as well.
25
Advertenties
Hoofdstukken
Inhoudsopgave
