Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Figure 46:
Place the footrests.
Setting the footrests (once only)
The Rollz Motion Electric is supplied with two adjustable footrests. You can adjust them
to the desired height with the supplied size 5 Allen key (Figure 48).
The correct height depends on the length of the lower leg and the way the user sits.
If the footrests are set too high, there will be too much pressure on the buttocks. If
the footrests are set too low, the pressure on the upper legs is too high. In a correct
position, the user sits with his lower legs at an angle of about 90 degrees
(Figure 49). The back of the feet can rest against the fabric.
Figure 48:
Adjusting the height of the
footrests with an Allen key size 5.
Figure 47:
Electric wheelchair is ready
to use.
Figure 49:
Good sitting position in
the wheelchair.
33
Advertenties
Hoofdstukken
Inhoudsopgave
