Download Inhoudsopgave Inhoud Print deze pagina

Using The Rollz Wheelchair Package - Rollz Motion Electric Gebruikshandleiding

Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

e. If the red handle is not going down without forcing it, take the wheelchair
package out of the notches behind the seat and try again. Please contact
your supplier if you still have difficulties after several attempts.

Using the Rollz wheelchair package

a. Attach the wheelchair package to the Rollz Motion Electric before you go out
(Figure 37).
b. To convert the walker to an electric wheelchair, the wheelchair package needs
to be pulled up. Take the handle of the wheelchair package and pull slightly up
and towards the front until halfway up the frame (Figure 40).
c. Pull the backrest further up and then back (Figure 41) so that the locking
bolts click into the upper guide rails on the frame (Figure 42). If the upper
locking pins do not slide smoothly into the upper guide rails on the frame, push
the backrest forward until halfway up the frame and try again.
NOTE
If the wheelchair package does not pull up smoothly, do not apply force. This can
damage the wheelchair package. Contact your supplier if the problem remains after
several attempts.
d. Loosen the adjustment handles anticlockwise (Figure 43) and turn the
handles around via the outside, until they are pointing towards the back
(Figure 44). Adjust the height for the person pushing the electric wheelchair
and turn the adjustment handles clockwise to tighten (Figure 45).
See Adjusting the height for correct posture.
e. Take the footrests out of the wheelchair bag and place them at the front of the
Rollz Motion Electric, into the footrest holders on the frame. Slide them down
from the top of the footrest holders (Figure 46). Do not apply force if the
footrests do not slide smoothly over the footrest holders. Take them out and try
again.
f. The electric wheelchair is now ready for use (Figure 47).
CAUTION
Before you sit down, always check that the locking bolts are correctly secured in the
guide rails. Do not sit down if one of the locking bolts is not secured. Instead, try to
place the seat again.
31

Advertenties

Inhoudsopgave
loading

Gerelateerde Producten voor Rollz Motion Electric

Inhoudsopgave