Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Unfolding & folding
When folded, the Rollz Motion Electric fits in most cars.
Unfolding goes as follows:
a. Pull the frame sides of the Rollz Motion Electric apart until almost completely
unfolded (Figure 10).
b. Push the seat down until it clicks into place. Important: the seat is not secured
until you have clearly heard it 'click' (Figure 11).
c. Pull away the seat cushion and place it straight on the seat (Figure 12).
Figure 10:
Unfold by pulling
the frame outwards.
CAUTION
Double check if the seat is locked in. Carefully lift the seat in the middle to make sure
that it is properly locked in place. Only then the Rollz Motion Electric can be safely
used.
Folding goes as follows:
a. Before you fold the frame, the underseat basket should be emptied, cables,
battery pack and motor controller must stay in the underseat basket.
b. Remove the wheelchair package if it is placed on the rollator. Read
Removing the wheelchair package for instructions.
c. Pull the seat cushion away, turn it 90 degrees and place it crosswise on
the side of the red handle (Figure 13).
Figure 11:
Push the seat
down till you hear a 'click'.
Figure 12:
Pull away the
cushion and attach it on
the seat.
21
Advertenties
Hoofdstukken
Inhoudsopgave
