Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
USING AS ELECTRIC WHEELCHAIR - with a person
pushing
Matching your pace
Whoever sits in the electric wheelchair and is being pushed for the first time, will need
time to get used to it. Same goes for the person pushing the wheelchair. The person
pushing and the person sitting in the electric wheelchair should regularly communicate
about the pace and route. This way, both will get used to using the Rollz Motion Electric
wheelchair. Walk slow at first, which will give you time to learn how to use the walker
with confidence.
Use of the electric support system - with a person pushing
While seated in the chair, the person pushing can activate the electric push support by
pressing the On/Off button.
(Figure 57):
1. Multi-Functional display
2. Gear display
3. Battery display
4. On/Off button
5. Power assist
6. Direction
7. Gear
8. Charge port (not used)
The following steps can only happen when the person pushing the wheelchair has their
hands on the handgrip. When the person takes their hands off the handgrip, the push
support will stop.
By pushing the |
|, the person pushing the wheelchair can change the forward
motion into a backwards motion.
M
By pushing the |
|, the person pushing the wheelchair can go through the different
gears, which are the following:
1
00
2
00009
3
4
4
5
6
Figure 57:
Push support controller
buttons and components.
km
M
7
8
37
Advertenties
Hoofdstukken
Inhoudsopgave
