Inhoudsopgave
Advertenties
Emissivity
Emissivity
0.95
0.85
Hardwood
Cast iron
Paper
Soft rubber
Glass
Enamel
Plaster
Sand
Concrete
Sandstone
Brick
Plywood
Woodchip wall-
Fireclay
paper
Matte tiles
Clear lacquer
Stahl ver-
Plastic:
rostet
PE, PP, PVC
Rusty steel
6.7 Measuring the temperature (Fig. 1-2)
In measuring mode, the ambient temperature (c)
and surface temperature (d) are shown in the dis-
play (5). See Fig. 2.
The ambient temperature (c) is automatically
measured and shown in real time.
Important!
After it is exposed to strong changes in tempe-
rature (e.g. from < 0°C / > 50°C to 20°C), let the
measuring device adjust to ambient temperature
for approx. 60 minutes.
To measure the surface temperature, proceed as
follows.
•
Aim the measuring device at the surface to
be measured. Use the laser to help you if ne-
cessary (see section 6.3) and be aware of the
maximum range (see section 4).
•
Press the On/Measure switch (3) until the sur-
face temperature (d) is shown. The value is
shown until the next measurement is taken.
•
Hold the On/Measure switch (3) down to take
measurements in real time.
Anl_TC_IT_550_SPK13.indb 14
Anl_TC_IT_550_SPK13.indb 14
GB
7. Cleaning, maintenance and
Emissivity
ordering spare parts
0.75
Cotton
7.1 Cleaning the tool
Cork
Only store and transport the measuring inst-
rument in the protective bag supplied with the
Oxidized steel
product and keep the laser distance meter clean
at all times. Never immerse the measuring instru-
ment in water or other liquids. Do not use cleaning
agents or solvents to clean the equipment if it is
only slightly dirty, just wipe it down with a damp
cloth. The receiver lens must be looked after with
great care.
7.2 Maintenance
There are no other parts inside the tool which re-
quire maintenance.
7.3 Ordering spare parts and accessories
Please provide the following information when
ordering spare parts:
•
Type of unit
•
Article number of the unit
•
ID number of the unit
•
Spare part number of the required spare part
For our latest prices and information please go to
www.Einhell-Service.com
- 14 -
Tip! For good results we
recommend high-quality ac-
cessories from
!
www.kwb.eu
welcome@kwb.eu
05.12.2024 10:43:44
05.12.2024 10:43:44
Advertenties
Inhoudsopgave
