Inhoudsopgave
Advertenties
5. Before using for the fi rst time
Inserting/changing batteries (Fig. 3 / Item 4)
•
Insert 2x 1.5 V Type AA (LR6) batteries as
follows
•
Press down on the latch (a) to open the batte-
ry compartment cover (4)
•
Insert the batteries, ensuring that you fit them
the right way round
•
Close the battery compartment cover (4) and
engage the latch (a)
•
The battery charge status is shown in indica-
tor position (f) on the display (5). See Fig. 2.
6. Operation
Important!
The measuring distance and measuring accuracy
can be aff ected by ambient conditions such as
sunlight or poor refl ection, which can have an ad-
verse eff ect on the resulting measurement.
6.1 Switching the measuring device On/Off
(Fig. 1 / Item 3)
Press the On/Measure switch (3) briefl y to switch
the measuring device on.
The instrument switches off automatically after
approx. 1 min. when not in use.
6.2 Setting the temperature unit (Fig. 1-2 /
Item 10)
You can choose from 2 temperature unit settings:
•
Celsius (°C)
•
Fahrenheit (°F)
By default, it is set to Celsius (°C). Press the °C/°F
button (10) to change this
6.3 Activating/deactivating the laser (Fig. 1-2
/ Item 7)
You can switch the laser pointer on to be used as
a visual aid or switch it off .
The laser pointer is switched on by default.
Press the LASER button (7) to switch it off or back
on
6.4 Setting the maximum temperature (Fig. 4)
You can set a maximum temperature threshold
value.
To set the threshold value, proceed as follows:
•
In measuring mode, press the SET button
(6) 1x.
•
Set the desired value using the arrow buttons
(8+9).
Anl_TC_IT_550_SPK13.indb 13
Anl_TC_IT_550_SPK13.indb 13
GB
•
Press the SET button (6) 3x to return to
measuring mode.
Below the threshold, the Info LED (11) lights up
green.
Above the threshold, the Info LED (11) lights up
red.
"Hi" will also appear in indicator position (a) of the
display (5). (See Fig. 2)
6.5 Setting the minimum temperature (Fig. 5)
You can set a minimum temperature threshold
value.
To set the threshold value, proceed as follows:
•
In measuring mode, press the SET button
(6) 2x.
•
Set the desired value using the arrow buttons
(8+9).
•
Press the SET button (6) 2x to return to
measuring mode.
Above the threshold, the Info LED (11) lights up
green.
Below the threshold, the Info LED (11) lights up
blue.
"Low" will also appear in indicator position (a) of
the display (5). (See Fig. 2)
6.6 Adjusting the emissivity ℇ (Fig. 6)
Diff erent bodies emit varying levels of thermal ra-
diation depending on their color and texture. The
emissivity level ℇ indicates the thermal radiation
of a body.
This value ranges from 0 (no radiation) to 1 (100
% radiation).
This value can be adjusted depending on the ma-
terial so as to off er optimum temperature values.
You can choose from 3 value settings (0.75 / 0.85
/ 0.95) on the device. Proceed as follows:
•
In measuring mode, press the SET button
(6) 3x
•
Use the arrow buttons (8+9) to choose a va-
lue in accordance with the table shown below
•
Press the SET button (6) 1x to return to
measuring mode.
- 13 -
05.12.2024 10:43:43
05.12.2024 10:43:43
Advertenties
Inhoudsopgave
