Inhoudsopgave
Advertenties
Installation and Operation Manual
X-VAP-VDM300-eng
Part Number: 541B210AAG
August, 2017
2-1 General
2-2 Receipt of Equipment
All manuals and user guides at all-guides.com
Brooks
This section provides installation instructions for the Brooks VDM300
Vapor Delivery Module. The installation of the VDM300 involves mounting
the device, making the required mechanical connections and making the
required electrical connections
When the instrument is received, the outside packing case should be
checked for damage incurred during shipment. If the packing case is
damaged, the local carrier should be notified at once regarding their
liability. A report should be submitted to your nearest Product Service
Department.
Brooks Instrument
407 W. Vine Street
P.O. Box 903
Hatfield, PA 19440 USA
Toll Free (888) 554 FLOW (3569)
Tel (215) 362 3700
Fax (215) 362 3745
E-mail: BrooksAm@BrooksInstrument.com
www.BrooksInstrument.com
Europe
Brooks Instrument GmbH
Zur Wetterwarte 50 Haus 377/B,
01109 Dresden
Germany
Tel +49 (0) 351 215 20 442
In case you need technical assistance:
USA 888 275 8946
Europe +49 351 215 2040
Japan +81 3 5633 7100
Korea +82 31 708 2521
Remove the envelope containing the packing list. Unpack and inspect the
VDM300 and additional items for any possible shipping damage. The
VDM300 is shipped with two each 312 series replacement fuses for the
power entry module, a 6' length of 1/8" O.D. Teflon tubing, a ferrite core for
the control cable, the certificate of conformance/ final test data and the
Installation & Operations Manual. The tubing can be connected to the tank
drain when draining Dl water from the tank inside the VDM300. Contact
Brooks if there are any problems or if more information is required.
The following items can be purchased separately; these items are not
necessary for the installation and are not used for normal operation of the
VDM300 but can be utilized for troubleshooting:
The Brooks Expert Support Tool (BEST) provides diagnostic tools and an
alternate access to VDM300 functions.
NOTE: The BEST must be installed on a separate computer in order to perform any
diagnostic function. Contact Brooks for information on purchasing the software.
®
VDM300 Vapor Delivery Module
Asia
Brooks Instrument Korea, Ltd.
D-406 Bundang Techno Park 151
Sungnam, Kyungki-do, 463-070
Korea
Tel +82 31 708 2522
Taiwan +886 3 5590 988
China +86 21 5079 8828
Singapore +6297 9741
Section 2
Installation
2-1
Advertenties
Inhoudsopgave
