Inhoudsopgave
Advertenties
EN
•
Remember to keep your surroundings safe. Do not let tools
and parts lie around in chaos. Remember that plastic foil and
bags pose o suffocation risk to small children.
•
Assembly parts necessary for a specific step in
the assembly manual are shown in pictures and included in
instructions. Use the elements indicated in the assembly
manual.
•
Do not tighten parts completely during the first stages
of the assembly. Tighten connections after all parts are placed
and fitted properly.
•
The manufacturer may have assembled some parts.
ASSEMBLY DIAGRAM (→ See page 2)
ATTENTION! Do not use parts other than those provided by the
manufacturer.
PARTS LIST
NO.
DESCRIPTION
1
Main frame
2
Reinforcement profile
3
Right-hand grip column
4
Left-hand grip column
5
Gas cylinder
6
Bearing
7
Front roller
8
Rear roller
9
Key 80*80*5 S6
10
Buffer washer
11
Buffer block
12
Column cap
13
Gear plate
14
Gear belt
15
Multi-ribbed belt
16
Engine cover
17
Lower engine cover
18
Left rear cover
19
Right rear guard
20
Side rail
21
Transport wheel
22
Cushioning pad
23
Stabilisation foot
24
Frame cap
25
EVA panel
26
Holder for remote control
27
Lower computer panel cover
28
Upper computer panel cover
29
Mobile device shelf
30
Anti-slip pad
31
Display screen
32
Panel screen
33
Double-sided tape
34
Motor cover fastening
35
LED display
36
Control board
37
Motor
38
Power supply cable
39
Earth wire
40
Switch
41
Connector
42
Power cable 180 cm
43
Remote control
44
LED display
45
Screw ST3.0*9
46
Safety key
47
Upper cable
Screw ST4.2*12 ∮12
48
Screw M8*40 S6
49
50
Screw ST4.2*12
51
Screw M8*50 S6
52
Washer D8
53
Screw M6*25 S4
54
Screw M6*35 S4
Screw ST4.2*25 ∮9
55
Screw M8*12 S6
56
Screw ST4.2*16 ∮9
57
Nut M8 S13
Washer ∮5.2*∮10*t1
58
59
60
Screw ST4.2*12
61
Screw ST3.0*16
Flat washer ∮9*∮16*t1.5
62
Screw M6*12 S6
63
64
ST4.2*12 screw
15
ST4.2*12 bolt ∮9
65
66
Screw ST4.2*12
67
Fixing ring D8
68
Screw M8*25 S6
69
Nut M8 S13
70
Silicone grease
ASSEMBLY MANUAL (→ See page 3)
CAUTION! Follow the steps below during the assembly and use tools
supplied with the product. Prepare sufficient space for the assembly
operation. It is advisable to assemble the product with another person
because of the weight of some elements.
FOLDING AND UNFOLDING (→ See page 5)
FOLDING THE DEVICE
NOTE! Before you start folding, check if all the bolts are tight and
disconnect the power supply cable.
QUANTITY
NOTE! Be careful with your hands and fingers when folding so that
1
they do not get crushed.
1
Fold the handles upright. Unscrew both column folding knobs by
1
turning counterclockwise to loosen the hinge. Fold the columns flat
1
along the running belt. Turn the knobs again to lock the columns.
2
2
UNFOLDING THE DEVICE
1
PLEASE NOTE! Ensure there are no third party or animals in the
1
immediate treadmill vicinity when its belt is lowered.
1
Loosen both knobs for folding the columns by turning
2
counterclockwise to loosen the hinge. Stand the columns upright.
2
Turn the knobs again to lock the columns. Unfold the handles.
2
1
ADJUSTMENTS
1
Levelling
1
Level the device by rotating the levelling feet in the rear and front
1
base.
1
1
HIGH-SPEED AND LOW-SPEED FUNCTIONS
1
CAUTION! The treadmill has two modes of operation.
2
When the handle is lowered, the treadmill operates in low-speed
2
mode, and the maximum speed is 6 kph.
8
When the handle is raised, the treadmill works in high-speed mode,
2
and the maximum speed is 10 kph.
2
CAUTION! Please stop the treadmill before switching the mode.
2
Successful switching will be indicated by a sound.
1
1
COMPUTER OPERATING INSTRUCTIONS
1
1
CAUTION! When operating in high-speed mode, it is possible to
1
control and change settings using the buttons on the panel. When
1
operating in low-speed mode, use the remote control for
1
controlling the treadmill.
4
5
START-UP
1
In high-speed mode, within 5 seconds after pressing the START/STOP
1
button on the panel, the device will start operation.
1
In low-speed mode, within 5 seconds after pressing the START button
3
on the remote control, the device will start operation.
1
1
ENERGY SAVER
1
The treadmill computer automatically goes into the energy saving
1
mode if no action is performed within 10 minutes. Press any button to
1
wake the system up.
1
11
EMERGENCY STOP
1
ATTENTION! Attach the safety key to your clothes for each
1
training.
2
It should be used in emergencies only. Do not use it as a regular stop
2
switch.
9
When placed incorrectly, the safety key prevents the treadmill
3
from starting.
2
ATTENTION! Make sure that the emergency stop system is
6
operational before using the treadmill. Remove the safety key by
2
pulling the cord. After the key is removed, the treadmill stops with a
2
delay depending on the operational speed. The running belt lift
5
system is stopped as well (if present). The device makes a short
4
stopping sound. All fields of the display show '---'.
7
After the key is reconnected, the device is reset.
1
1
BUTTONS
2
•
START / STOP — it is used to start the treadmill in the manual
2
mode.
4
2
4
2
2
2
2
1
Advertenties
Inhoudsopgave
