Inhoudsopgave
Advertenties
4. CLAGE app "Smart Control"
A
B
C
Initial operation
The Smart Control app can be connected to the DFX Next either via Bluetooth or via
WLAN.
1. Make sure that the instantaneous water heater is supplied with voltage.
2. Install the control app on your tablet / smartphone. Search the Apple AppStore or
the Google Playstore for »CLAGE Smart Control« and install the app. Do not start
the control app yet.
Connecting via Bluetooth
1. Activate the Bluetooth function of your smartphone / tablet.
2. Start the Smart Control Control app and confirm all security prompts.
Note: No location-related data is processed. Activating and accepting the location
function is required due to new guidelines for all Android apps with Bluetooth func-
tion.
3. A message appears the first time the app is activated. Tapping on "OK" takes you to
the device configuration "A" for manual setup (menu path: Main menu → Settings
→ Devices). Tapping on "Demo" allows you to explore the app control. You can exit
demo mode again under (Main menu → Settings → Devices).
4. Select "Bluetooth Interface" and tap on "Search devices...".
5. A maximum of ten Bluetooth devices found are then scanned and listed "B". The
device name is composed of the model abbreviation and the last 4 digits of the
serial number. If your device is not included, repeat the scan.
6. Select your device and confirm with "OK".
7. Enter the Bluetooth PIN manually or scan the QR code. Both can be found on the
type plate under the panel at the bottom of the unit.
8. The unit is now connected to your smartphone / tablet. Check the function by
changing the temperature via your smartphone / tablet. The display of the remote
control must show the same value.
Connecting via WLAN
The DFX Next is in access point mode ex works and generates its own WLAN. You can
connect to this as follows:
1. Activate the WLAN function of your smartphone / tablet.
2. Establish the connection between the tablet / smartphone and the instantaneous
water heater:
a. Select the WLAN section under Settings in the tablet / smartphone and connect
the tablet / smartphone to the WLAN of the instantaneous water heater. You will
find the SSID and password on the type plate under the panel at the bottom of
the instantaneous water heater. To log in, scan the adjacent QR code or enter
the data manually.
3. Start the Smart Control app and confirm the initial setup prompt with "OK". You
will get to the device configuration and can check the successful installation by
selecting the DFX server and tapping on "Connect...". The following text should be
displayed: "The Home Server can be used".
Configuration as Client
Control via smart speakers, e.g. with Amazon Alexa, is only possible if the DFX Next
has been registered as a client on a network with Internet access.
• Protect the appliance from unauthorised access by connecting it to an Internet-
connected IT infrastructure only if it is protected by a firewall.
• Protect the appliance against unauthorised access by using a secure Wi-Fi pass-
word. This should consist of letters, numbers and special characters and should not
be listed in the lexicon.
35
CLAGE
EN
Advertenties
Hoofdstukken
Inhoudsopgave
