Operation instruction
Note: Carefully read the enclosed safety instructions through in full before the appliance
is installed, put into service and used and follow them in the further steps and during use!
1. Description of the appliance
The E-convenience instant water heater DFX Next is a fully electronically controlled
instantaneous water heater with e-paper display remote control for a convenient and
efficient water supply to one or more tap outlets.
Its electronic control regulates the power consumption depending on the selected
outlet temperature, the respective inlet temperature and the flow rate, thus reaching
the set temperature exactly to the degree and keeping it constant in case of pres-
sure fluctuations. The required outlet temperature can be entered via the Bluetooth
remote control within a range between 20 °C and 60 °C and can be read off that
e-paper display. Alternatively, the appliance can be conveniently controlled via the
CLAGE app with a smartphone or tablet.
The FX Next remote control has an intuitive menu guide where different user profiles
can be set up and where collected data can be read out
The inlet temperature can be up to 70 °C so that operation in connection with reheat-
ing, e.g. in solar systems, is possible.
It is possible to use the instantaneous water heater in combination with an external
load shedding relay for electronically controlled instantaneous water heaters (refer to
installing instructions).
As soon as you open the hot water tap, the instantaneous water heater switches on
auto ma ti cally. When the tap is closed, the appliance automatically switches off. The
water heater is operated with the wireless remote control or via the CLAGE app with
a smartphone or tablet.
Simplified EU Declaration of Conformity
CLAGE GmbH hereby declares that this device complies with Directive 2014/53/EU.
The complete text of the EU Declaration of Conformity is available at the following
internet address: www.clage.com/downloads
27
CLAGE
EN
®