OPERATION
SAfETY
1.2
Other symbols in this documentation
Note
General information is identified by the symbol shown
on the left.
f Read these texts carefully.
f
Symbol
Meaning
Material damage
!
(Appliance and consequential losses, environmental pol-
lution)
Appliance disposal
f This symbol indicates that you have to do something. The ac-
f
tion you need to take is described step by step.
1.3
Units of measurement
Note
All measurements are given in mm unless stated oth-
erwise.
WWW.STIEBEL-ELTRON.COM
2.
Safety
2.1
Intended use
The appliance is intended for heating and storing potable water
when operating a heat pump with a high output. The DHW and
cylinder are heated in combination with the WTS charging station
available as an accessory.
Suitable flanged immersion heaters can be fitted by a heating
contractor.
Any other use beyond that described shall be deemed inappropri-
ate. Observation of these instructions and of instructions for any
accessories used is also part of the correct use of this appliance.
2.2
General safety instructions
WARNING Burns
There is a risk of scalding at outlet temperatures in ex-
cess of 43 °C.
WARNING Injury
!
Where children or persons with limited physical, sensory
or mental abilities are allowed to control this appliance,
ensure that this will only happen under supervision or
after appropriate instruction by a person responsible
for their safety.
Children should be supervised to ensure that they never
play with the appliance!
Note
The appliance is under pressure.
During the heat-up process, expansion water will drip
from the safety valve. If water continues to drip when
the heat-up process is completed, please inform your
qualified contractor.
3.
Appliance description
The internal steel cylinder is coated in "anticor
equipped with a signal anode to protect the inside of the cylinder
against corrosion.
SBB 751 SOL and SBB 1001 SOL
These appliance types are additionally equipped with an indirect
coil for heating with solar energy.
SBB 751-1001 | SBB 751-1001 SOL |
®
" enamel and is
17