Advertenties
Beschikbare talen
Beschikbare talen
3.8
Symbols and warnings
General warning
Compulsory reading of the Use
and Maintenance Manual
Compulsory head protection
4 TOOL INSTALLATION AND STARTING
4.1
Installation and starting operations
•
Plug the battery (16) into its seat inside the tool housing, until you hear a click.
•
Switch on the tool by means of the ON/OFF button (10).
•
The tool is ready to be used
4.1.1
Warning for the tool starting
WARNING!
•
Before starting the motor, check that the chain (1) does not touch anything.
•
Do not work on a tree or a ladder, since it would be extremely dangerous
Before starting any cutting task, it is necessary to wear protective clothing.
•
•
Check that all the safety and protection devices are efficient and correctly assembled.
Check the bar (2) and the chain (1) for proper assembly and the chain for adequate tension.
•
Check all the fixing screws for correct tightening.
4.1.2
Filling the lubrication oil reservoir
Fill the oil reservoir (14) for the chain (1) lubrication.
The lack of lubrication may cause chain (1) seizing.
Oil is poured onto the chain (1) by pressing the rubber bulb (26) positioned on the oil reservoir plug (12).
Use and maintenance manual – Translation of
original Instruction.: 03, Date 16/12/2022
Compulsory adequate clothing
Compulsory hand protection
Compulsory feet protection
Page 33
Advertenties
