Advertenties
Beschikbare talen
Beschikbare talen
7. Switch the motor assembly on.
8. Set the operating time and temperature, which the liquid in the mixing bowl should
be heated to.
9. Push the heat button and the device will start to work. Alternatively, you can switch
on the cross-blade adapter with the Speed rotary knob instead of the heat button.
10. If you would like to check whether it is cooked before the set operating time has
elapsed, push the heat button to switch off the heat function or rotate the Speed knob
to the 0 position. The timer will stop.
11. Gently tip the lid forward so that the steam can escape to the back. Make sure that
the condensation drips into the steamer adapter by holding it in the middle over it. You
can then carefully remove the lid.
12. Lift the steamer adapter, wait a few seconds until the steam condenses and has
dripped onto the mixing bowl lid before you place it on a heat-resistant base.
13. If you would like to continue steaming, place the steamer adapter on the mixing bowl
lid, push the heat button again or rotate the Speed knob and the timer will continue
to run.
14. To turn off the device, set the On/Off switch to the 0 position and pull the mains plug
out of the socket.
09747_de-en-fr-nl_V3.indb 51
09747_de-en-fr-nl_V3.indb 51
All manuals and user guides at all-guides.com
51
4. Place the steamer adapter on the mixing bowl lid. In the
process, make sure that the adapter is securely seated.
5. Fill it with the desired food that is not packed down. Make
sure that some of the vents are not obstructed to allow the
steam to rise. If necessary, insert the intermediate panel in
the steamer adapter.
6. Place the lid on the steamer adapter.
EN
11.12.2015 12:49:13
11.12.2015 12:49:13
Advertenties
