Advertenties
Beschikbare talen
Beschikbare talen
1. Place the motor assembly on a work area:
– Choose an area which is dry, clean and level work area that cannot be heated up.
– Be sure to maintain suffi cient distance to the edge of the work area to ensure that
the device does not fall during operation, and to other heat sources, e.g. stovetops.
– There should also be clearance over the device (to cupboards and cabinets) and
on the sides in order to prevent any damage from any hot steam that is emitted.
– Also select a place where you can conveniently operate the device.
2. Make sure that the suction feet properly stick to the underlying surface.
3. Insert the mains plug in a properly installed socket that is easily accessible.
4. Make sure that the cross-blade adapter is properly fi xed in the mixing bowl. If you
would like to use additional accessories, e. g. for stirring and steaming, follow the
instructions in the chapter "Using the accessories properly".
5. Add the ingredients to the mixing bowl as desired. Do not exceed the MAX mark in
the mixing bowl! You will fi nd some ideas for recipes at the end of this instruction
manual.
6. Secure the lid on the mixing bowl and insert it in the motor assembly. If necessary,
close the lid opening with the enclosed measuring cup. For this, follow the instruc-
tions in the chapter "Using the accessories properly".
7. Turn on the motor assembly by fl ipping the On/Off switch to position I.
8. If you want the device to switch off automatically after a certain period of time, set the
time with the Time rotary knob. Otherwise, you should proceed with the next step.
9. If you would like to heat up or cook ingredients, set the desired temperature with the
Temp rotary knob.
If you push the heat button, only the contents of the mixing bowl will be heated only.
The cross-blade adapter is deactivated as a result.
10. Turn the Speed rotary knob to switch the cross-blade adapter on and off. Select a
speed that suits the meal you are preparing. Slowly increase the speed when setting
it. NOTE: Once the contents of the mixing bowl have reached a temperature of 60 °C
or more, the maximum speed level is 5.
The preselected operating time, heating temperature and speed level can be
changed at any time while preparing food. Turn the corresponding knob to do so.
If the preparation process ends before the set time elapsed as the result of the
Speed rotary knob being turned back in order to e.g. add an ingredient, the cur-
rent time will remain on the display until the device is switched back on.
11. Once the ingredients have been processed or cooked, switch the device off (fl ip the
On/Off switch to position 0) and pull the mains plug out of the socket.
12. If you would like to continue processing the ingredients after the set operating time
has elapsed, fi rst turn the Speed knob to 0 and then back to the desired speed.
13. Carefully take the mixing bowl out of the motor assembly, open it and remove the
food you are blending or cooking.
09747_de-en-fr-nl_V3.indb 47
09747_de-en-fr-nl_V3.indb 47
All manuals and user guides at all-guides.com
47
EN
11.12.2015 12:49:13
11.12.2015 12:49:13
Advertenties
