Inhoudsopgave
Advertenties
• Power cable plug must be within easy
reach after installation (do not route it
above the hob). Do not use extension or
multi sockets in power connection.
• and must use the appropriate socket
outlet/line and plug for oven. In case of
the product's power limits are out of cur-
rent carrying capability of plug and
socket outlet/line, the product must be
connected through fixed electrical in-
stallation directly without using plug and
socket outlet/line.
If your appliance has a cord and plug:
Perform the electrical connection of your
appliance by plugging it to a grounded
socket.
4.3 Gas connection
General warnings
• There is risk of explosion, fire and toxic-
ation could be occur if installation, repair
or connection are made from unauthor-
ised/unlicensed/ unqualified person or
technician.
• Before placing the product, make sure
that the local distribution conditions
(gas type and pressure) and whether the
product gas setting complies with these
conditions. Gas adjustment conditions
and values of the product are located on
the labels (or type label).
• If your country code is not on the label,
follow the local technical instructions for
your country for gas connection and
conversion.
• Product can be connected to gas supply
system only by an authorised/licensed/
qualified person or technician.
• Manufacturer shall not be held respons-
ible for damages arising from proced-
ures carried out by unauthorised/unli-
censed/ unqualified person or techni-
cian.
• Before starting any work on the gas in-
stallation, disconnect the gas supply.
There is the risk of explosion!
• If you need to use your product later with
a different type of gas, you must consult
the authorised/licensed/ qualified per-
son or technician for the related conver-
sion procedure.
• Make sure that the gas connection is
checked well for tightness after each
use. The manufacturer cannot be held
responsible for any damages that may
arise due to gas leakage that may occur
as a result of gas connection or conver-
sion made by unauthorized/non-li-
censed persons.
Risks of fire:
• If you do not make the connection ac-
cording to the instructions below, there
will be the risk of gas leakage and fire.
Our company cannot be held responsible
for damages resulting from this.
• Gas connection must be made by an au-
thorised/licensed/ qualified person or
technician only.
• Make sure that the gas hose to be used
in the gas connection complies with the
local gas standards.
• The flexible gas hose must be connected
in a way that it does not contact the
moving parts and hot surfaces (shown
below figures) around it and is not
trapped when the moving parts are trav-
elling. (e.g. drawers). Besides, it should
not be placed in spaces where it might
get squeezed.
• Do not move the product whose gas
connection is complete. If it is moved,
there may be a risk of gas leakage.
• A spanner must be used for gas connec-
tion and conversion.
Choosing the gas connection side
• The gas hose should be connected by
making wide-angle turns against the
possibility of breaking and folding during
the connection.
• The gas hose should not be crushed, fol-
ded, pinched, touched by sharp corners
or come into contact with hot parts of
the product and cookware on the
product. There is a risk of explosion due
to damage to the gas hose!
EN / 25
EN
NL
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
