Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Remove the door seal (fig.
5.
Lift out the inner panel (fig.
6.
carefully on a flat surface.
If necessary, you can remove the condensate trough
7.
for cleaning. To do this, open the appliance door
fully (fig.
).
&
Tilt the condensate trough up and remove it (fig.
8.
Clean the panels with glass cleaner and a soft cloth.
Wipe the condensate trough with a cloth and some hot
soapy water.
:
Warning
Risk of injury!
Scratched glass in the appliance door may develop
■
into a crack. Do not use a glass scraper, sharp or
abrasive cleaning aids or detergents.
The hinges on the appliance door move when
Risk of injury!
■
opening and closing the door, and you may be
trapped. Keep your hands away from the hinges.
).
$
) and set it down
%
'
Fitting panels
Open the appliance door fully and refit the
1.
condensate trough. To do this, insert the trough from
above and rotate it at the bottom (fig.
Slide each inner panel back in and make sure that it
2.
is sitting correctly at the bottom in the retainer
(fig.
).
"
).
Push the inner panel in at the top (fig.
3.
Hooking in the door seal (fig.
4.
Appliance door
en
).
!
).
#
).
$
49
Advertenties
Hoofdstukken
Inhoudsopgave
