Download Inhoudsopgave Inhoud Print deze pagina

Setting The Time On The Clock; Childproof Lock; Activating And Deactivating - CONSTRUCTA CC3M600 0 Series Gebruiksaanwijzing

Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

The timer duration will start at a different default value
depending on which button you touch first:
5 minutes with the A button and 10 minutes with the
@ button.
Touch the M button.
1.
The Q symbol will be lit on the display panel.
Use the A or @ button to set the timer duration.
2.
After a few seconds, the duration on the timer will start
to elapse.
Tip: To use the timer for the oven, enter the required
cooking time. The oven will switch off automatically at
the end of this cooking time.
The short-term timer duration has elapsed
An audible signal will sound. ‹‹‹‹ will appear on the
display panel.
Touch any button to switch off the short-term timer.
Changing and cancelling
You can use the A or @ button to change the timer
duration at any time. After a few seconds, the change
will be applied.
To cancel, use the A button to set the short-term timer
to ‹‹:‹‹. The short-term timer is now switched off.

Setting the time on the clock

Once the appliance has been connected to the mains
or following a power failure, the clock will flash on the
display panel. Set the clock.
The function selector must be set to the "Off" position.
Use the A or @ button to set the time on the clock.
1.
Touch the e button to confirm.
2.
Changing the time on the clock
You can change the time again when you need to, e.g.
from summer to winter time.
To do this, with the appliance switched off, touch and
hold the e button until the clock flashes, and then use
the A or @ button to change the time.
AChildproof lock
Y our appliance is equipped with a childproof lock so
C h i l d p r o o f l o c k
that children cannot switch it on accidentally or change
any settings.
Notes
If a hob is connected, it will not be affected by the
childproof lock on the oven.
After a power cut, the childproof lock will no longer
be active.

Activating and deactivating

To activate the childproof lock, the function selector
must be set to "Off".
Touch and hold the e button for approx. 4 seconds.
†'"" will be shown on the display panel. The
childproof lock is now active.
Note: If a timer duration Q has been set, this will
continue to count down. While the childproof lock is
active, the timer duration cannot be changed.
To deactivate, touch and hold the e button again for
4 seconds until †'"" goes out on the display panel.

Childproof lock

en
45

Advertenties

Hoofdstukken

Inhoudsopgave
loading

Inhoudsopgave