Problem
Traces of rust on cutlery.
There are residues of detergent in
the dispenser at the end of the pro‐
gramme.
Odours inside the appliance.
Limescale deposits on the table‐
ware, on the tub and on the inside
of the door.
Dull, discoloured or chipped table‐
ware.
Refer to "Before first use", "Daily
use" or "Hints and tips" for other
possible causes.
12. TECHNICAL INFORMATION
Dimensions
Electrical connection
Water supply pressure
Possible cause and solution
• There is too much salt in the water used for washing.
Refer to "The water softener".
• Silver and stainless steel cutlery were placed together.
Do not place silver and stainless steel items close to‐
gether.
• The detergent tablet got stuck in the dispenser and
was not washed away by water.
• Water cannot wash away the detergent from the dis‐
penser. Make sure that the spray arm is not blocked or
clogged.
• Make sure that items in the baskets do not impede the
lid of the detergent dispenser from opening.
• Refer to "Internal cleaning".
• The level of salt is low, check the refill indicator.
• The cap of the salt container is loose.
• Your tap water is hard. Refer to "The water soften‐
er".
• Even using multi-functional tabs use salt and set re‐
generation of the water softener. Refer to "The water
softener".
• If limescale deposits persist, clean the appliance with
the suitable detergents.
• Try different detergent.
• Contact the detergent manufacturer.
• Make sure that only dishwasher-safe items are wash‐
ed in the appliance.
• Load and unload the basket carefully. Refer to basket
loading leaflet.
• Place delicate items in the upper basket.
Width / height / depth (mm)
Voltage (V)
1)
Frequency (Hz)
Min. / max. bar (MPa)
596 / 818 - 898 / 575
220 - 240
50
0.5 (0.05) / 10 (1)
ENGLISH
47