Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Problem and alarm code
Technical malfunction of the appliance.
• The indicator
intermittently.
• The light related to the start button
flashes continuously.
The level of water inside the appliance is too
high.
• The indicator
intermittently.
• The light related to the start button
flashes continuously.
The appliance stops and starts more times
during operation.
The programme lasts too long.
Small leak from the appliance door.
The appliance door is difficult to close.
The appliance door opens during the wash
cycle.
Rattling/knocking sounds from inside the ap‐
pliance.
The appliance trips the circuit-beaker.
Refer to "Before first use", "Daily
use", or "Hints and tips" for other
possible causes.
flashes 12 times
flashes 15 times
Possible cause and solution
• Switch the appliance off and on.
• Switch the appliance off and on.
• Make sure that the filters are clean.
• Make sure that the outlet hose is installed at
the right height above the floor. Refer to the
installation instructions.
• It is normal. It provides optimal cleaning re‐
sults and energy savings.
• If the delayed start option is set, cancel the
delay setting or wait for the end of the count‐
down.
• Refer to the consumption values table in the
chapter "Programmes".
• The appliance is not levelled. Loosen or tight‐
en the adjustable feet (if applicable).
• The appliance door is not centred on the tub.
Adjust the rear foot (if applicable).
• The appliance is not levelled. Loosen or tight‐
en the adjustable feet (if applicable).
• Parts of the tableware are protruding from the
baskets.
• The AirDry function is activated. You can de‐
activate the function. Refer to "Settings".
• The tableware is not properly arranged in the
baskets. Refer to basket loading leaflet.
• Make sure that the spray arms can rotate free‐
ly.
• The amperage is insufficient to supply simulta‐
neously all the appliances in use. Check the
socket amperage and the capacity of the me‐
ter or turn off one of the appliances in use.
• Internal electrical fault of the appliance. Con‐
tact an Authorised Service Centre.
Once you have checked the appliance, press
the start button. If the problem occurs again,
contact an Authorised Service Centre.
For alarm codes not described in the table,
contact an Authorised Service Centre.
ENGLISH
45
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
