Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
3. To install the spray arm back, press it
downwards.
11. TROUBLESHOOTING
WARNING!
Improper repair of the appliance may
pose a danger to the safety of the user.
Any repairs must be performed by
qualified personnel.
The majority of problems that can occur
can be solved without the need to contact
an Authorised Service Centre.
Problem and alarm code
You cannot activate the appliance.
The programme does not start.
10.6 Cleaning the upper spray arm
Do not remove the upper spray arm. If the
openings in the spray arm are clogged,
remove the remaining particles of soil with a
thin pointed object, e.g. a toothpick.
Refer to the below table for information on
possible problems.
With some problems, the dedicated indicator
flashes intermittently to indicate a malfunction
and the alarm code.
Possible cause and solution
• Make sure that the mains plug is connected to
the mains socket.
• Make sure that there is no damaged fuse in
the fuse box.
• Make sure that the appliance door is closed.
• Press the start button.
• If the delay start is set, cancel the setting or
wait for the end of the countdown.
• The appliance recharges the resin inside the
water softener. The duration of the procedure
is approximately 5 minutes.
ENGLISH
43
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
