Download Inhoudsopgave Inhoud Print deze pagina

Using The Detergent; Setting And Starting A Programme; Starting A Programme With Delay Start; Cancelling The Programme - JUNO JGIN605E4 Gebruiksaanwijzing

Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

8.1 Using the detergent

A
B
30
20
CAUTION!
Only use detergent specifically designed
for dishwashers.
1. Press the release button (B) to open the
lid (C).
2. Put the detergent, in powder or tablets, in
the compartment (A).
3. If the programme has a prewash phase,
put a small quantity of detergent on the
inner part of the appliance door.
4. Close the lid. Make sure that the release
button locks into position.
For information about the detergent
dosage, refer to the manufacturer's
instructions on the packaging of the
product. Usually, 20 - 25 ml of gel
detergent is adequate for washing a load
with normal soil.
Do not fill the compartment (A) with
more than 30 ml of gel detergent.

8.2 Setting and starting a programme

Starting a programme
1. Open the water tap.
2. Close the appliance door.
3. Turn the knob until the programme
marker is aligned with the programme
you want to set.
• The on/off indicator is on.
• The start indicator starts to flash.
4. Press
.
38
ENGLISH
C
• The programme starts.
• The indicator of the washing phase is
on.
• The on/off indicator and start indicator
are on.
Starting a programme with delay
start
1. Set a programme.
2. Press
to delay the start of the
programme by 3 hours.
The light related to the button is on.
3. Press
to start the countdown.
The light related to the button is on.
During the countdown, it is not possible to
change the programme.
When the countdown is complete, the
programme starts.

Cancelling the programme

Press and hold
until the light related to the
button starts to flash.
Make sure that there is detergent in the
detergent dispenser before you start a new
programme.
Cancelling the delay start while the
countdown operates
1. Press and hold
the button starts to flash.
2. Press
to start the programme.
Opening the door while the
appliance operates
Opening the door while a programme is
running stops the appliance. It may affect the
energy consumption and the programme
duration. After closing the door, the appliance
continues from the point of interruption.
until the light related to

Advertenties

Hoofdstukken

Inhoudsopgave
loading

Inhoudsopgave