Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Switching on/off
Press the button
corresponding to the
cycle you wish to use. The
light will come on.
During the cycles, the paddle or the freezer unit stops intermittently. This is usual. Your ice cream is ready once
the button flashes.
Changing the mode
If you have selected the wrong mode or cycle, you can change to the one you want at any time, simply by
pressing the corresponding button.
Pause
You can stop the paddle at any time to check the consistency of your ice cream or serve a few scoops.
To do this, hold the selected cycle button for 1 second.
The button will start to flash more quickly.
To end the pause, simply hold the flashing button for 1 second.
Without any action from you for 4 minutes, the machine will switch itself off and the lights will go out.
Storage in automatic mode
When the paddle stops turning or after 60 minutes in the case of Gelato
for granita ), the machine goes into storage mode. The selected cycle button will flash slowly.
The storage cycle has a maximum time limit of 2 hours.
Without any action from you during this time, the machine will turn itself off at the end of the 2 hours and
all the lights will go out.
Stopping the machine
Press the selected cycle button (or
Never move your appliance while it is running.
The paddle and the
freezer unit will already
be running. Pour in
the chilled ingredients.
Replace the lid.
/OFF for 1 second).
AUTOMATIC CYCLES
The indicator button will
remain on throughout the
automatic cycle (20-60
min).
and ice cream
Stop: hold the selected
button (or the
button
for 1 second).
(40 minutes
27
Advertenties
Inhoudsopgave
