Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
m
WARNING!
The vibration and noise emissions during
u
actual use of the product can differ from the
declared values depending on the manner
in which the tool is used, especially what
kind of workpiece is processed .
Try to minimise exposure to vibration and
noise . Examples of measures to reduce
vibration include wearing gloves when
using the tool and limiting working time . All
parts of the operating cycle must be taken
into account (e . g . times when the product
is switched off and when it is running idle in
addition to the trigger time) .
Safety instructions
˜ General power tool safety
warnings
WARNING!
m
Read all safety warnings,
u
instructions, illustrations and
specifications provided with
this power tool. Failure to follow
all instructions listed below may result in
electric shock, fire and/or serious injury .
Save all warnings and instructions for
future reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool .
Work area safety
Keep work area clean and well lit.
a)
Cluttered or dark areas invite accidents .
Do not operate power tools in
b)
explosive atmospheres, such as in
the presence of flammable liquids,
gases or dust. Power tools create sparks
which may ignite the dust or fumes .
Keep children and bystanders away
c)
while operating a power tool.
Distractions can cause you to lose control .
Electrical safety
Power tool plugs must match the
a)
outlet. Never modify the plug in any
way. Do not use any adapter plugs
with earthed (grounded) power
tools. Unmodified plugs and matching
outlets will reduce risk of electric shock .
Avoid body contact with earthed or
b)
grounded surfaces, such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric shock if
your body is earthed or grounded .
Do not expose power tools to rain
c)
or wet conditions. Water entering a
power tool will increase the risk of electric
shock .
Do not abuse the cord. Never use
d)
the cord for carrying, pulling or
unplugging the power tool. Keep
cord away from heat, oil, sharp
edges or moving parts. Damaged or
entangled cords increase the risk of electric
shock .
When operating a power tool
e)
outdoors, use an extension cord
suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of
electric shock .
If operating a power tool in a
f)
damp location is unavoidable, use
a residual current device (RCD)
protected supply. Use of an RCD
reduces the risk of electric shock .
GB/IE/NI
9
Advertenties
Hoofdstukken
Inhoudsopgave
