Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
m
CAUTION! Risk of injury!
Saw blades can be sharp and become
hot during use . Always wear protective
gloves when handling saw blades .
m
CAUTION! Risk of injury!
Remove the saw blade from the product
u
before adjusting the base plate
(see "Inserting/removing the saw blade") .
Do not use the product without having
u
inserted the base plate
NOTE
The base plate
u
4 ]
[
swivelled to different positions to adapt to
the workpiece .
1 . Unlock the base plate
lever
in a counter-clockwise direction .
1 ]
[
2 . Adjust the desired position of the base
plate
: Push the base plate in or pull the
[
4 ]
base plate out .
3 . Lock the base plate
lever
in a clockwise direction .
[
1 ]
˜ Inserting/removing the saw
blade
m
WARNING!
Always switch the product off, remove
the battery pack
product cool down before making
any adjustments!
m
CAUTION! Risk of injury!
Saw blades can be sharp and become
hot during use . Always wear protective
gloves when handling saw blades .
CAUTION! Risk of injury!
m
Do not use any blunt, bent or damaged
u
saw blade .
Always install a suitable saw blade for
u
the job .
16 GB/IE/NI
[
4 ]
.
4 ]
[
can be adjusted and
: Turn the locking
4 ]
[
: Turn the locking
4 ]
[
and let the
11 ]
[
Inserting the saw blade
(Fig . F)
1 . Turn the chuck ring
clockwise direction .
2 . Insert the saw blade
holder
.
[
3 ]
3 . Release the chuck ring
ring return to the original position .
4 . Before use: Pull on the saw blade
check if the saw blade is inserted safely and
tightly .
Removing the saw blade
1 . Turn the chuck ring
clockwise direction .
2 . Pull the saw blade
holder
.
[
3 ]
3 . Release the chuck ring
ring return to the original position .
NOTE
For certain work, the saw blade
u
also be inserted after turning it by 180°
(Fig . G) .
˜ Operation
˜ Switching on/off
m
CAUTION! Risk of injury!
Always wear protective gloves when
handling or working with the product .
m
CAUTION! Risk of injury!
Before switching on the product: Ensure
u
the saw blade
10 ]
[
the workpiece .
Ensure your stance is stable . Always
u
hold the front handle
handle
firmly with both hands while
7 ]
[
working (Fig . H) .
Keep your hands away from the saw
u
blade
when the product is in
[
10 ]
operation .
in a counter-
2 ]
[
into the saw blade
10 ]
[
and let the chuck
2 ]
[
to
[
10 ]
in a counter-
[
2 ]
out of the saw blade
10 ]
[
and let the chuck
[
2 ]
can
10 ]
[
is not in contact with
and the rear
[
9 ]
Advertenties
Hoofdstukken
Inhoudsopgave
