ENGLISH
TROUBLESHOOTING (Continues)
Trouble
The side brooms do not operate.
The machine collects little debris/dust.
The hopper does not lift.
The hopper does not dump.
The hopper does not lower.
The dust guard system (optional) does not
work.
(*)
For the relevant instructions, see also to the Engine Manual.
(**)
SCRAPPING
Before scrapping the machine, remove and separate the following materials, which must be disposed of properly according to the
Law in force:
–
Batteries
–
–
Main and side brooms
–
Hydraulic system oil
–
–
Plastic hoses and components
–
Electrical and electronic components (*)
(*)
36
USER MANUAL
Possible cause
The FR1 or FR2 circuit breaker of the side
brooms is open.
The hopper is full.
The skirts are not properly adjusted or are
broken.
The brooms are not properly adjusted.
The F1 fuse is open.
The hydraulic system oil level is incorrect.
The F6 fuse is open.
The hopper is too low.
In case of low temperatures, the hydraulic
valve.
The F2 fuse is open.
The water tank is empty.
The pump is faulty.
The F5 fuse is open.
SW4000 - 1464815000
Remedy
Wait for the side broom motor to cool down,
then reset the fuse by pressing the relevant
push-button.
by disassembling it.
Empty the hopper.
Adjust/replace the skirts.
Adjust the broom height.
Replace the fuse.
Check the hydraulic system oil level in the tank.
Replace the fuse.
Lift the hopper at a minimum height of 350 mm.
Wait a few moments to let the hydraulic system
Replace the fuse.
Fill the tank.
Clean.
Replace. (**)
Replace the fuse.