ENGLISH
ENGINE AIR FILTER CHECK/CLEANING
CAUTION!
wearing.
1.
Drive the machine on a level ground and engage the
parking brake.
2.
Turn the ignition key (61) to "0".
3.
Open the engine compartment hood (18) with the handle
(41) and fasten it with the support rod (53).
4.
Lift and disassemble the right side bulkhead (45).
5.
Remove the wing nut (A, Fig. 20) and remove the cover
(B).
6.
element.
7.
8.
maintenance table).
9.
hard surface to remove the dust, or blow compressed
air (no more than 207 kPa (2.1 kgf/cm)) from inside the
damaged.
then squeeze it to remove the surplus oil.
10. Clean with a wet cloth the base (F) and the cover (B) of the
(G) to the carburettor.
11.
12. Install the cover (B) and screw down the wing nut (A).
30
USER MANUAL
SW4000 - 1464815000
H
Figure 20
A
B
C
E
D
G
F
P100615