Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
ENGINE OIL LEVEL CHECK
CAUTION!
Running the engine with a low oil level can
damage the engine itself.
NOTE
The oil alert system will automatically stop the engine
before the oil level goes down under the safety limit.
To avoid a sudden engine stop, always check the oil
level before each start-up.
1.
Drive the machine on a level ground and engage the
parking brake.
2.
Turn the ignition key (61) to "0".
3.
Open the engine compartment hood (18) with the handle
(41) and fasten it with the support rod (53).
4.
Lift and disassemble the right side bulkhead (45).
5.
6.
not tighten it, then remove it to check the oil level.
7.
If the oil level is near or under the lower limit mark (C) on
8.
ENGINE OIL CHANGE
CAUTION!
The discharged engine oil must be disposed of
properly according to the Law in force.
NOTE
It is advisable to change the oil when the engine is
1.
Drive the machine on a level ground and engage the
parking brake.
2.
Turn the ignition key (61) to "0".
3.
Open the engine compartment hood (18) with the handle
(41) and fasten it with the support rod (53).
4.
Lift and disassemble the right side bulkhead (45).
5.
hose (E) in a position that eases the oil drain, then remove
the plug (F).
6.
Remove the oil drain plug (F) from the hose and drain the
oil into a suitable container, then install the oil drain plug
and hose.
7.
NOTE
As for engine oil type and quantity, see the Technical
Data chapter and the Engine Manual.
8.
USER MANUAL
F
A
B
E
A
C
Figure 21
1464815000 - SW4000
ENGLISH
D
P100616
31
Advertenties
Hoofdstukken
Inhoudsopgave
