Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
CUTOUT DIMENSIONS
The instructions below refer to a built-in installation.
In a built-in installation, the appliance is installed in a
cabinet niche or framed in with panels.
Niche Dimensions
•
The niche dimensions below must be checked before
beginning the installation.
CATEGORY
A
B
C
Make sure that the cabinetry inside which you will install the
appliance has been securely mounted in your kitchen.
Your cabinet must be properly secured to the floor and to
the wall using appropriate mounting hardware.
For the best installation, clearances between the cabinet
and the appliance must be in compliance with the
measurements specified in the installation instructions.
The side walls must be free of obstructions and their
surfaces must be flat. The minimum thickness of the side
walls must be 16 mm (5/8"). The minimum thickness of the
door panels to be attached to the appliance must be 19 mm
(¾").
RFZ45S5FPRS /
RFZ45S5FPLS
18" (457 mm)
width
depth
25" (635 mm)
height
84" (2134 mm)
RFZ60S5FPNS
RLD60S5FPNS
24" (609 mm)
24" (609 mm)
25" (635 mm)
25" (635 mm)
84" (2134 mm)
84" (2134 mm)
NOTE
There is a stainless steel door and
stainless toe kick option. Please consult
your Authorized Service Provider.
Ventilation openings where the air enters and exits the unit
must never be obstructed. The user is responsible for
periodically cleaning off the dust and debris that can
accumulate on the grill over time.
Fig. 1
RLD75S5FPNS
30" (762mm)
25" (635 mm)
84" (2134 mm)
9
Advertenties
Hoofdstukken
Inhoudsopgave
