Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
INSTALLATION INSTRUCTION
INSTALLING THE BOTTOM CABINET
Complete the water connection
•
Use a cutter to cut of any excess waterline length,
allowing sufficient slack of 254 mm (10") to ensure an
easy bend and clear connection, with no tension or
potential kinks in the supply line that runs to the
connector.
•
A 254 mm (10")
•
Use 2 wrenches to firmly connect both the hose that
runs from the mains and the connection to the valve on
the refrigerator.
WARNING
The hose that runs from the mains
connection must be one piece. Do not use
extension hoses.
WARNING
Make sure that the power is cut off when
establishing
connection.
WARNING
The water valve must be closed when
connecting the water hose.
WARNING
It is recommended to keep the water valve
accessible after product installation.
WARNING
The pressure of the water system must be
between 25-80 psi (1.7-5.5 bar).
34
A
the
appliance's
NOTE
Once the connection is complete, you must
open the water valve and make sure that
there is no leakage.
Fig. 37
water
Fig. 38
Advertenties
Hoofdstukken
Inhoudsopgave
