Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
INSTALLATION INSTRUCTION
•
After adjusting the adjustable feet, check that the
appliance is level both side-to-side and back-to-front by
placing a level on the floor of the freezer compartment
(the drawer should be removed for this).
Adjusting the refrigerator based on the cabinet niche.
•
For products with supplied stainless steel panel doors,
the position of the unit is adjusted so that the door and
the cabinet surface are flush and a min. 3.2 mm (1/8")
distance from panels and gables is ensured.
•
For panel-ready units, the refrigerator should be
installed at a depth that takes into consideration the
custom overlay panel thickness, so as to ensure a flush
installation, if desired.
NOTE
It is important to align the upper edge of the
freezer drawer when aligning the unit, as its
height and position are fixed. All of the
other panels can be adjusted using the
adjustment mechanisms built into the
mounting hardware. As shown below, an
installation depth template tool is provided
for your convenience.
Fig. 30
•
A 19 mm (3/4")
•
B 24 mm (15/16")
•
C 32 mm (1 1/4")
•
D 38 mm (1 1/2")
Fig. 31
A
B
C
D
Fig. 32
31
Advertenties
Hoofdstukken
Inhoudsopgave
