INSTALLATION INSTRUCTION
•
Insert the water supply hose into the channel opening at
the back of the unit and pull it through to the front of the
unit to ensure that the water connection can be made
once the unit is installed in the niche.
NOTE
Use the method below to prevent the cord
from getting wedged in.
Connect the electrical plug to the power
outlet. Turn on the unit to ensure it has
power (to see if the product is operating,
check
if
compartment are on or off).
A
D
•
A Power cord
•
B Nylon cord
•
C Move to wall
•
D Water hose
Connect the electrical plug to the power outlet. Turn on the
unit to ensure it has power. (To see if the product is
operating, check if the lamps in the freezer compartment
are on or off).
28
the
lamps
in
the
B
NOTE
Protect the front edges of the cabinet niche
with masking tape; this will help protect
them from damage when pushing the unit
back into the niche. Use some packing tape
to secure the excess electrical cord to the
back of unit to prevent slack from catching
under the unit during installation.
NOTE
The unit's plug must be accessible after
installation. If the plug is not accessible
after installation, the power must have a
dedicated circuit breaker which can be
accessed to cut power off using the main
switch.
WARNING
Fig. 26
•
freezer
•
NOTE
Use the upper edges of the fridge and
C
freezer doors to align the unit in the niche
opening.
Adjustment of other edges is explained in
the following pages.
Fig. 27
Make sure that the power cord does not
get wedged in when placing the product.
•
Push the product carefully towards
the cabinet to position it; the unit
should slide into the niche with
relative ease. If you experience
resistance while placing the product
in the cabinet:
•
The floor might be uneven.
•
The adjustable feet might be loose
(please see the relevant section to
learn how to adjust the adjustable
feet).
You must attach the freezer door
temporarily to align the product before
placing it.