Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
INSTALLATION INSTRUCTION
WARNING
•
To prevent damage to the finished
surface of the panel, use screws suitable
for the door panel thickness.
•
Install the panel brackets using screws
(#15). You can also use the template
(#6) provided with the product to align
these parts. It is recommended to keep
this template for future reference.
The fridge door hanger sheet and fridge door upper
mechanism assembly must be on the upper part of the
door.
Attach the door handle to the upper door panel prior to
installing the panel on the fridge. Use handle hardware that
will ensure a secure connection to the panel and that will lie
flush against or, in any case, not protrude from the back of
the overlay panel. This may require countersinking the
handle hardware into the back of the panel, as shown
below. The door handle mounting screws must not protrude
either.
Fig. 54 RFZ45S5FPRS / RFZ45S5FPLS
Fig. 55 RFZ60S5FPNS RLD60S5FPNS RLD75S5FPNS
WARNING
The handle mounting holes will have to be
adjusted based on the handles to be used
in the kitchen design.
WARNING
The minimum door thickness must be 19
mm (3/4").
WARNING
To prevent damage to the finished surface
of the panel, use screws suitable for the
door thickness.
43
Advertenties
Hoofdstukken
Inhoudsopgave
