INSTALLATION INSTRUCTION
ATTACHING THE AIR VENT GRILLE
•
Use 5 screws to attach the vent aperture component.
NOTE
The lower grill can be adjusted forward or
backward
accommodate the cabinet toe kick. Also, a
piece of decorative cabinet toe kick
material can be affixed to the lower grill to
match the cabinets, provided there is no
obstruction to vent grills and air flow.
WARNING
If installing a one-piece cabinet toe kick
across the front of the fridge, you must
ensure proper air flow and no obstruction to
the vent grills.
of
24
mm
(15/16")
ATTACHING THE DECORATIVE TRIM
COVERS
•
The decorative side trim is a soft plastic material with a
barbed end intended to be inserted between the cabinet
gable and the appliance body (#2), onto the right/left
connection brackets. Some trimming may be required to
ensure the trim pieces can fit around the brackets; the
thickness of the barbed end may also require trimming
depending on the width of the gap between the side
body and the cabinet gable.
Fig. 39
•
Push in the finished trim (#1) on the upper connection
to
bracket.
Fig. 40
Fig. 41
35