Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
INSTALLATION INSTRUCTION
The minimum section dimensions of the wooden support
must be 76 mm x 102 mm (3" x 4"). The width of the
support must be equal to the clearance where it will be
installed. This can be achieved using one 102 mm x 102
mm (4" x 4") or two 51 mm x 102 mm (2" x 4") pieces of
framing lumber.
The calculation of blocking depth is based on a standard
niche depth. If the depth of the niche is greater than 610
mm (24"), ensure the blocking overlaps the upper rear
fridge body by 51 mm (2").
•
A 76 mm x 102 mm (3" x 4")
Position the wooden support, mark the location on the rear
wall, select suitable screws and mount it securely.
WARNING
The quantity and type of screws or
fasteners to be used for affixing wooden
blocking must be suitable for ensuring a
secure connection to the rear wall.
Fig. 21
25
Advertenties
Hoofdstukken
Inhoudsopgave
