Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
USER MANUAL
ENVIRONMENTAL CONDITIONS
Working
The machine should only be used in a suitable environment.
The work environment should be well-lit, should present no
danger of explosions and should be protected from bad
weather conditions.
The machine functions correctly within the following
environmental conditions:
Temperature: +10°C ÷ +40°C.
Humidity: 30% ÷ 95% non-condensed.
Storage
When not in use, the machine should be stored indoor and
protected from bad weather conditions.
Temperature: +1°C ÷ +50°C.
Humidity: maximum 95% non-condensed.
NOISE LEVEL
Measurements were taken in the workplace and around the
machine at a distance of 1 m and at a height of 1.6 m from the
floor level under working conditions.
If the machine is used according to the instructions, the
vibrations do not cause dangerous situations.
The machine vibration level is below 2.5 m/s².
8
USE
WARNING!
The machine should be used ONLY by
qualified personnel who know all the machine
controls.
NOTE
Before starting the machine, check the seat
sensor operation: without the operator, the
engine should immediately stop.
CONTROLS AND INSTRUMENTS
(See Fig. H)
1.
Main and side broom rotation lever
2.
Hopper lifting lever
3.
Skirt closing lever
4.
Accelerator lever
5.
Parking brake lever
6.
Ignition switch
7.
Turn signal combination switch
8.
Warning switch
9.
Fan-filter shaker switch
10. Fan-turn signal indicator light
11. Brake pedal
12. Drive pedal
13. Hour counter
14. Fuse box
15. Fuel warning light
16. Horn switch
17. Light switch
18. Steering wheel
19. Battery-oil warning light
20. Hopper overheating buzzer (optional)
21. Starting device
Lever controls
The control levers are used for the following functions:
–
Skirt opening;
–
Side broom lowering;
–
Hopper lifting;
–
Skirt closing;
–
Main broom lowering;
–
Side broom lifting;
–
Main broom lifting;
–
Hopper lowering.
33014812(1)2005-07 A
Advertenties
Hoofdstukken
Inhoudsopgave
