Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Stability
Machine stability depends on the conditions in which it is
used.
If the machine is used within the conditions of use specified in
the manual, it is stable.
To this end, the following tests were carried out under the
same conditions on a prototype identical to the series model
and no stability problems arose. The conditions were:
Flat ground with good surface conditions:
–
Transfer maximum speed: 13 km/h
–
Working speed: from 1 to 8 km/h
–
Bending radius (maximum speed of 12 km/h): 3 m
–
Bending radius (speed of 5 km/h): 0 m
On sloping ground with good surface conditions and
maximum longitudinal slope of 20%:
–
Bending radius (maximum speed of 5 km/h): 3 m
–
Bending radius (speed of 1 km/h): 0 m
Maximum crossfall while in transfer: 15%.
Maximum crossfall at 5 km/h: 20%.
The tests were carried out with lowered and empty hopper.
For different conditions of use, the machine operator should
be able to assess the limits of the machine and should, in any
case, follow the indications laid down in the manual.
Information on brooms
Side brooms (10, Fig. F)
–
Polypropylene side broom
–
Polypropylene and steel side broom
–
Steel side broom
–
Nylon side broom
Main brooms (8, Fig. F)
–
Natural fibre and polypropylene main broom
–
Polypropylene main broom
–
Polypropylene and steel main broom
–
Nylon main broom
Brooms with a moplen shaft or with different bristles can be
supplied on request.
SAFETY SYSTEMS
The machine is provided with an operator's seat sensor that
stops the machine as soon as the operator leaves the seat.
33014812(1)2005-07 A
MAIN TECHNICAL DATA
General data
Weight in running conditions (without
operator)
Length
Width
Height
Speed
Gradeability
Sweeping range (main broom only)
Sweeping range with one side broom
Sweeping range with two side brooms
Side broom diameter
Main broom length
Hopper capacity
Hopper maximum load
Dumping height
Filtering system
Petrol engine
Tyres
Superelastic wheels
Fuel tank
Hydraulic system tank
Engine oil pan capacity
Transmission
Steering
Brake
Parking brake
Sweeping system
Controls
Petrol engine
Make
Type
Cylinders
Displacement
Bore
Stroke
Maximum speed
Maximum speed (in running condition)
Maximum power
Idle speed
Battery
USER MANUAL
Values
690 Kg
1,880 mm
1,170 mm
1,470/2,230 mm
0/13 km/h
16%
800 mm
1,150 mm
1,450 mm
550 mm
800 mm
115 litres
120 Kg
0/1,420 mm
5 m
Lombardini LGW 627
3.008
3.008
10 litres
32 litres
1.6 litres
Hydrostatic
Mechanical
Hydraulic
Mechanical
Self-levelling device
Hydraulic
Values
Lombardini
LGW 627
611 cm
72 mm
75 mm
2,800 rpm
2,600 rpm
12 kW
1,200 rpm
12 V 40 Ah
2
2
3
7
Advertenties
Hoofdstukken
Inhoudsopgave
