Installation In The Usa And Canada - Grundfos TPE Series Installatie- En Bedieningsinstructies
Verberg thumbnails
Zie ook voor TPE Series:
- Installatie- en bedieningsinstructies (39 pagina's) ,
- Installatie- en bedieningsinstructies (29 pagina's) ,
- Installatie- en bedieningsinstructies (34 pagina's)
Inhoudsopgave
Advertenties
Bijlage B
B.1. Installation in the USA and Canada
To maintain the cURus approval, the
additional information in this section must
be followed.
Environmental enclosure ratings
According to UL 778/C22.2 No 108-14, pumps
intended for outdoor use must be marked enclosure
type 3 and the product must be tested at a surface
temperature down to -31 °F (-35 °C). The MLE Model
J enclosure is approved for NEMA type 3 or 4 and
is rated at a surface temperature down to 32 °F (0
°C), thus it is only for indoor use in UL 778/C22.2 No
108-14 pump applications.
The MGE, MLE Model K enclosure is approved for
NEMA type 12 and is suitable for indoor use only.
For more information about ambient temperature
during operation, see the sections on operating
conditions and ambient temperature.
EMC statements for USA
This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to
part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference when the equipment is operated in a
commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the
instruction manual, may cause harmful interference
to radio communications. Operation of this equipment
in a residential area is likely to cause harmful
interference in which case the user will be required
to correct the interference at his own expense.
MLE motors of the C2 emission category
fulfill the limits of Class A.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct
the interference by one or more of the following
measures:
110
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment
and receiver.
•
Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
•
Consult the dealer or an experienced radio/TV
technician for help.
MLE motors of the C1 emission category
fulfill the limits of Class B.
MLE motors of the C3 emission category
can only be used in industrial plants and
public utilities in accordance with FCC §
15.103(b) and ICES 003 § 1.5.1(c). In
other locations, MLE motors of the C1 or
C2 emission category must be used.
Canadian Interference-Causing Equipment
Standard
MLE Model J complies with the Canadian ICES-003
Class B specifications. This Class B device meets
all the requirements of the Canadian interference-
causing equipment regulations.
L'appareil MLE Model J, est conforme à la norme
NMB-003 du Canada pour le matériel de classe
B. Cet appareil de classe B respecte toutes les
exigences du règlement canadien s'appliquant au
matériel brouilleur.
MLE Model K complies with the Canadian ICES-003
Class A specifications. This Class A device meets
all the requirements of the Canadian interference-
causing equipment regulations.
L'appareil MLE Model K, est conforme à la norme
NMB-003 du Canada pour le matériel de classe
A. Cet appareil de classe A respecte toutes les
exigences du règlement canadien s'appliquant au
matériel brouilleur.
Hot surface
The product might reach a surface temperature
of 149 °F (65 °C), therefore pay attention when
operating the product.
The following marking is found on the product:
Advertenties
Inhoudsopgave
