Inhoudsopgave
Advertenties
Note: If you have problems restarting the robot, place it at a maximum distance of 50 cm from the
boundary wire and restart it. Your personal settings will remain unchanged.
Manual_FX-RB224_Int24_rev1
The robot runs, but
does not cut the grass
The regular working
time after each
charging process has
become shorter.
Robot does not
routinely come out
after prior activation of
the rain sensor.
Robot drives round
itself in circles
Black screen
Screws for fastening
the blade disc are
loose.
Foreign objects have
got between the disc
and drive
The cutting height is set
incorrectly.
The charging contacts
are dirty
The capacity of the
battery has decreased
after frequent charging
and discharging.
The rain sensor is still
active
It finds no signal
51
Fasten the
corresponding screws
carefully.
Remove the foreign
bodies completely.
Set the cutting height
appropriately
Clean all charging
contacts carefully.
A new battery is
required to be able to
work efficiently again
Clean all metal contacts
thoroughly with Spritus
Check that no more
than 250 metres of
cable have been laid
(total number)
Place the machine back
in the charging station
and charge the mower
for at least 10 minutes.
Then switch the mower
off and switch it on
again after approx. 1
minute. The screen
should now display
again.
Advertenties
Inhoudsopgave
