Inhoudsopgave
Advertenties
Charging contacts
•
Clean the charging contacts on the robotic lawnmower and charging station a few times during
the season with fine emery paper or steel wool.
It is important to ensure that all bolts, screws and nuts are always correctly tightened so that the
robotic mower has the best possible working conditions.
Replacing spare parts:
Blades:
•
The blades have 2 sharp edges and can be rotated if they have become blunt on one edge.
•
If both edges are blunt, the blades can be easily replaced with a screwdriver.
Note: Remember to switch off the mains switch before starting work.
•
Once you have removed the screw, it is important that you remove grass and other dirt from
the blade holder.
•
You can then insert the new blade.
•
Screw the blade screw in tightly. Check whether the blades can be turned.
Note: It is important that all 3 blades are reversed or replaced at the same time.
Battery:
•
In general, the battery life is 5 years, depending on the workload and maintenance of the
robotic lawnmower.
Storage in winter:
•
We recommend that you store the robotic lawnmower plus charging station in a dry and frost-
free room over the winter after you have removed grass and other dirt (only with a dry cloth
and scraper).
•
Carefully clean the charging tentacles of the docking station and the copper plates of the
machine to prevent corrosion. Polish with steel wool and apply a little acid-free oil.
Note: You should charge the device every 2 months in winter to maximise the service life of the
Manual_FX-RB224_Int24_rev1
on the robot.
Note: Always use original/authorised spare parts!
battery.
extend the battery.
46
Advertenties
Inhoudsopgave
