16. MAINTENANCE AND WINTER STORAGE:
To get the most out of your robotic lawnmower, it is important that you inspect the machine and its
mowing area regularly.
Regular cleaning:
•
You will extend the service life of your robotic lawnmower if you keep it clean regularly by
removing leaves, branches and dirt.
Note: It is very important to ONLY use a brush or dry cloth for cleaning. The use of water can damage
Top cover
•
Lift the top cover and clean it with a soft brush to remove grass and dirt. You can wipe it with
a damp cloth (DO NOT rinse with water because of the electronics).
Underside
•
Also clean the underside with a soft brush.
•
Ensure in particular that the blades and the blade holder can rotate freely.
If the robotic lawnmower frequently runs in wet grass, more grass automatically settles in
This significantly reduces the cutting performance and it is therefore very important to
remove the grass. You also need to clean the rotor blades regularly so that they can rotate.
Charging station
•
You must also clean the charging station regularly by removing dirt and grass from the base
plate to prevent poor contact between the charging contacts of the charging station and the
robot.
•
It is important to check that the respective charging contacts are correctly connected to each
other.
•
Over time, the charging station may sink a little as the surface sinks due to the decomposition
of the grass.
Manual_FX-RB224_Int24_rev1
the electrical system.
Note: Remember to switch off the mains switch before cleaning!
the cutting chamber.
45