Inhoudsopgave
Advertenties
If your neighbour also has a robotic lawnmower, it is important that you lay your boundary wire and
docking station at least 100 cm away from your neighbour's boundary wire. To maximise the signal,
we recommend that you do not lay more than 400 m of wire.
To avoid problems later on, you should follow the sketch carefully to lay the boundary wire correctly.
IMPORTANT: Before installing the robotic lawnmower, mow the lawn to a
maximum height of 3 cm with your conventional mower. This will avoid the
error message E8 (grass too high).
Positioning the charging station
Start by placing the charging station on your sketch at an appropriate distance from your outdoor
socket (230 V). The mains cable of the charging station is 8 m long. It is important to position the
cover so that the LED indicator of the charging station is under the cover.
The charging station must be placed on a firm, level surface with the "IN" arrow on the charging
station pointing towards the work area.
Avoid placing the charging station:
•
in a corner of the lawn,
•
in low-lying areas where the charging station or the robotic lawnmower could be damaged by
Manual_FX-RB224_Int24_rev1
34
Advertenties
Inhoudsopgave
