Inhoudsopgave
Advertenties
During use
•
Keep hands and feet away from rotating parts / blades.
•
Never lift or carry a machine while the engine is running.
•
Switch off the mains switch (0):
- Before you move an obstacle out of the way in front of the machine
- Before checking, cleaning or working on the machine.
Important: Do not leave the machine unattended if you know that pets, children or people are in the
vicinity.
Maintenance and storage:
•
Never clean the underside of the mower with running water. It should only be cleaned with a
brush/cloth (slightly damp at most).
•
All nuts, bolts and screws must be firmly tightened to ensure that the machine is in a safe
operating condition.
•
Worn or damaged parts must be replaced for safety reasons.
•
Ensure that only authorised parts are used when replacing blades and screws.
•
Ensure that the batteries are only charged with the correct charger / adapter recommended
by Fuxtec. Improper use can lead to electric shock, overheating or leakage of corrosive liquid
from the battery.
•
In the event of leakage from the battery, rinse with water or neutralising agent and seek
medical assistance in the event of eye contact etc.
•
The machine should be maintained in accordance with the manufacturer's instructions.
Please also note the point: Maintenance and winter storage.
13. PLANNING
Determination of the working area:
To ensure that the robot can mow in the desired area - and only in this area - you must mark the area
with a boundary wire.
Before you start, it is important to make a sketch of the robot's working area and the "obstacles" it is
to avoid, which should therefore also be marked with boundary wire. The boundary wire should be
laid so that the distance between the robotic lawnmower and the boundary wire is never more than
a maximum of 15 metres.
Manual_FX-RB224_Int24_rev1
33
Advertenties
Inhoudsopgave
