Inhoudsopgave
Advertenties
•
If it does not find a new path within 10 seconds, the robot switches itself off and requires a
manual restart to get it running again.
Rain sensor:
•
When it rains, the robot automatically returns to the docking station and starts cutting when
the next work cycle begins.
•
Raindrops from overhanging branches can activate the rain sensor; in this case, the robot
returns to the docking station (see display).
Lifting sensors:
•
These sensors are located near the 2 front wheels and measure the contact of the wheels with
the surface.
•
If the robot is lifted manually or if one or both wheels run into a hole, the robot switches off
and must be restarted manually.
•
A restart on the lawn can only take place if you move the machine so that it is at a maximum
distance of 50 cm from the boundary wire.
•
To start, you must select the area and then press the "START" button. The work cycle is not
changed.
Tilt sensor:
•
A 6-axis sensor is integrated into the robotic lawnmower, which measures the angle of
inclination in all directions.
•
If the angle of inclination exceeds 30°, the blades are stopped immediately, but the robot
continues to move.
•
If the angle decreases again within 10 seconds, the blades restart automatically. However, if
the angle does not decrease within 10 seconds, the mower switches off and requires a manual
restart.
•
A restart on the lawn can only take place if you move the machine so that it is at a maximum
distance of 50 cm from the boundary wire
•
To start, you must select the area and then press the "START" button. The work cycle is not
changed.
Manual_FX-RB224_Int24_rev1
44
Advertenties
Inhoudsopgave
